Earth-Sheltered Home Design

If you are looking for a home with many energy-efficient features that will provide a comfortable, tranquil, weather-resistant atmosphere, an earth-sheltered house could be right for you.

There are two basic types of earth-sheltered houses:

  • Underground
  • Bermed (or banked with earth)

Both types usually have earth-covered roofs. Some roofs may have a vegetation cover to reduce erosion.

To help determine what type of earth-sheltered house and design might work best, you should consider the following:

  • Advantages and disadvantages of such a home
  • Site-specific design factors
  • Construction materials and considerations

Designing Underground Earth-Sheltered Homes

When an entire earth-sheltered house is built below grade or completely underground, it’s called an underground structure. The atrium or courtyard design can accommodate an underground, earth-sheltered house.

Atrium or Courtyard Design

An earth-covered dwelling may have as little as 6–8 inches (0.2 meters) of sod or as much as 9 feet (2.7 meters) of earth covering the structure. An atrium design offers an open feeling because it has four walls that give exposure to daylight. This design uses a subgrade open area as the entry and focal point of the house.

The house is built completely below ground on a flat site, and the major living spaces surround a central outdoor courtyard. The windows and glass doors that are on the exposed walls facing the atrium provide light, solar heat, outside views, and access via a stairway from the ground level. Atrium/courtyard homes are usually covered with less than 3 feet (0.9 meters) of earth primarily because greater depths do not improve energy efficiency. This style also offers the potential for natural ventilation.

The atrium design is hardly visible from ground level and barely interrupts the landscape. It also provides good protection from winter winds and offers a private outdoor space. This design is ideal for an area without scenic exterior views, in dense developments, and on sites in noisy areas. Passive solar gain—heat obtained through windows—might be more limited, due to the window position in an atrium plan. Courtyard drainage and snow removal are important items to consider in design.

Designing Bermed Earth-Sheltered Homes

A bermed earth-sheltered house may be built above grade or partially below grade, with outside earth surrounding one or more walls. Such a structure can accommodate more conventional earth-sheltered house designs, such as elevational and penetrational.

Elevational Design

Elevational plans expose one whole face of the house and cover the other sides—and perhaps the roof—with earth. The covered sides protect and insulate the house. The exposed front of the house, usually facing south, allows the sun to light and heat the interior. The floor plan is arranged so common areas and bedrooms share light and heat from the southern exposure.

This type of house may be placed at varying depths below ground level and is usually set into the side of a hill. The view provided will be one of landscape, rather than open sky, as in the atrium design. A structure designed in this way can be the least expensive and simplest to build of all earth-sheltered structures.

The elevational design may have limited internal air circulation and reduced daylight in the northern portions of the house, though there are ways to alleviate these problems by using skylights. The wide design of the house can be offset by close attention to architectural details, landscaping, and exterior materials.

Penetrational Design

In a penetrational design, earth covers the entire house, except where it is retained for windows and doors. The house is usually built at ground level, and earth is built up (or bermed) around and on top of it. This design allows cross-ventilation opportunities and access to natural light from more than one side of the house.

Advantages and Disadvantages of Earth-Sheltered Homes

As with any home design, earth-sheltered houses have their advantages and disadvantages.

Advantages

There are many advantages to earth-sheltered construction. An earth-sheltered home is less susceptible to the impact of extreme outdoor air temperatures, so you won’t feel the effects of adverse weather as much as in a conventional house. Temperatures inside the house are more stable than in conventional homes. And with less temperature variability, interior rooms seem more comfortable.

Because earth covers part or all of their exterior, earth-sheltered houses require less outside maintenance, such as painting and cleaning gutters. Constructing a house that is dug into the earth or surrounded by earth builds in some natural soundproofing. Plans for most earth-sheltered houses “blend” the building into the landscape more harmoniously than a conventional home.

Finally, earth-sheltered houses can cost less to insure because their design offers extra protection against high winds, hailstorms, and natural disasters such as tornados and hurricanes.

Disadvantages

As with any type of unusual construction, there are some disadvantages associated with earth-sheltered housing. Principal downsides are the initial cost of construction, which may be up to 20% higher. Also, an increased level of care is required to avoid moisture problems, during both the construction and the life of the house.

It can take more diligence to resell an earth-sheltered home, and buyers may have a few more hurdles to clear in the mortgage application process.

Site-Specific Factors for Earth-Sheltered Home Design

Before deciding to design and build an earth-sheltered house, you need to consider the building site’s climate, topography, soil, and groundwater level.

Climate and Topography

The climate in your geographical area will determine whether an earth-sheltered house can be a practical housing solution. Studies show that earth-sheltered houses are more cost-effective in climates that have significant temperature extremes and low humidity, such as the Rocky Mountains and northern Great Plains. Earth temperatures vary much less than air temperatures in these areas, which means the earth can absorb extra heat from the house in hot weather or insulate the house to maintain warmth in cold weather.

The site’s topography and microclimate determine how easily the building can be surrounded with earth. A modest slope requires more excavation than a steep one, and a flat site is the most demanding, needing extensive excavation. A south-facing slope in a region with moderate to long winters is ideal for an earth-sheltered building. South-facing windows can let in sunlight for direct heating, while the rest of the house is set back into the slope.

In regions with mild winters and predominantly hot summers, a north-facing slope might be ideal. Every site differs, but generally southern exposures offer more sun and daylight throughout the year than north-facing slopes. Most designs can be built to take advantage of each site.

Soil

The type of soil at your site is another critical consideration. Some types of soil are more suitable than others for earth-sheltered construction. For example, the best soils are granular, such as sand and gravel. These soils compact well for bearing the weight of the construction materials and are very permeable, which means they allow water to drain quickly. The poorest soils are cohesive, like clay, which may expand when wet and has poor permeability. Soil tests, offered through professional testing services, can determine load-bearing capability of soils and possible settlements that may occur.

Radon is an invisible and odorless radioactive gas produced naturally when uranium in rock decomposes. It is found in the soil and in outdoor air in harmless amounts, but can reach dangerous levels when trapped. Radon levels are another factor to consider in locating your home. Areas with high concentrations of radon can be hazardous, although there are methods that can reduce radon buildup in both conventional and earth-sheltered dwellings.

Groundwater Level

The groundwater level at your building site is another important consideration. Building above the water table is almost essential. Choosing a site where the water will naturally drain away from the building is the best way to avoid water pressure against underground walls. The site should be surveyed for low spots and areas where water will collect. Seasonal or regular surface water flows should be channeled away from the structure. Drainage systems must be designed to draw water away from the structure to reduce the frequency and length of time the water remains in contact with the building’s exterior. Underground footing drains similar to or greater than those required by a house with a basement are necessary in many cases.

Construction Materials and Considerations for Earth-Sheltered Homes

Before designing an earth-sheltered house, you should consider what’s involved in its construction, including your construction material options.

Construction Materials

The construction materials for each type of structure will vary, depending on characteristics of the site and the type of design. However, general guidelines show that houses more deeply buried require stronger, more durable construction materials.

Materials must provide a good surface for waterproofing and insulation to withstand the pressure and moisture of the surrounding ground. When soil is wet or frozen, the pressure on the walls and floors increases. Pressure also increases with depth, so materials such as concrete and reinforced masonry, wood, and steel are all suitable.

Concrete

Concrete is the most common choice for constructing earth-sheltered buildings. Not only is it strong, it is also durable and fire resistant. Several forms of concrete are used. Lightly reinforced concrete, which is poured and reinforced at the site, is used for noncritical structural elements such as concrete foundations, floor slabs, and exterior walls with less than 6 feet (1.83 meters) of earth cover. Precast reinforced concrete can resist loads at any reasonable depth and can be used for floors, walls, and roofs. Concrete absorbs and stores heat, helping to prevent temperature swings that can damage some building material.

Precast concrete components are cured at a plant or on-site location before they are used, thereby decreasing construction time and cost in comparison to cast-in-place forms. The uses and advantages of precast and cast-in-place concrete are similar, except that precast concrete works best in simple or repeatable shapes. Special care must be taken to make the joints between sections watertight.

Concrete can also provide supplemental strength in other types of earthen construction. For example, a concrete topping can be added to wooden roof planks, and cement “parging” (or coating) can be added to walls with masonry construction before waterproofing.

Masonry

Masonry (i.e., brick or stone) can be used for walls that will receive vertical or lateral pressure from earth cover. It is reinforced with steel bars that are put in the core of the masonry in places of high stress, such as weight-bearing walls or walls with earth against them. Masonry generally costs less than cast-in-place concrete.

Wood

Wood can be used extensively in earth-sheltered construction for both interior and structural work including floors, roofs, and exterior walls. Wood is attractive for its color and warmth, and complements tile and masonry, as well as concrete walls, floors, and ceilings. However, using wood as a structural material requires wooden frame walls, which must withstand lateral pressure and be restricted to a burial depth of one story. Beyond this depth, the rapidly increasing cost of wood construction restricts most builders from using it as a structural material.

Although wood can cost less than other materials, it does not offer the strength that a material such as steel does, so it may not be the best choice for structural material in some houses. Wood must also be treated with preservatives to prevent damage from moisture. If your structure can make practical use of wood as a framing material, employing carpenters who can rapidly construct a timber frame for an earth-sheltered house can decrease labor costs.

Steel

Steel is used for beams, bar joists, columns, and concrete reinforcement. It is particularly useful because of its high tensional and compressional strength. The primary disadvantage of steel is that it must be protected against corrosion if it is exposed to the elements or to groundwater. It is also expensive, so it must be used efficiently to be economical as a structural material.

Alternative Construction Materials

A form of earth-sheltered house that has been receiving much attention is referred to as an Earthship. These houses are built to be self-contained and independent; their design allows occupants to grow food inside and to maintain their own water and solar electrical systems. Some builders believe they have proven the design’s ability to tap into the constant temperature of the earth and store additional energy from the sun in winter, although a back-up system, usually electric, may be recommended.

These Earthships carry out their environmentally conscious theme by employing unusual building materials in the form of recycled automobile tires filled with compacted earth for thermal mass and structure. Aluminum or tin cans are also used for filling minor walls that are not load-bearing. Foam insulation can be applied to exposed exterior or interior walls and covered with stucco. Interior walls can also be drywalled for a more conventional look.

Other Construction Considerations

Waterproofing

Waterproofing can be a challenge in earth-sheltered construction. Keep in mind these three ways to reduce the risk of water damage in your house: choose the site carefully, plan the drainage both at and below the surface of the house, and waterproof your house.

There are several waterproofing systems currently in use, including rubberized asphalt, plastic and vulcanized sheets, liquid polyurethanes, and bentonite. Each has its advantages and the one you choose will depend on your site and house plan.

  • Rubberized asphalt combines a small amount of synthetic rubber with asphalt and is coated with a polyethylene layer to form sheets. It can be applied directly to walls and roofs and has a long life expectancy.
  • Plastic and vulcanized sheets are among the most common types of underground waterproofing. Plastic sheets include high-density polyethylene, chlorinated polyethylene, polyvinyl chloride, and chlorosulfonated polyethylene. Suitable vulcanized membranes or synthetic rubbers include isobutylene isoprene, ethylene propylene diene monomer, polychloroprene (neoprene), and polyisobutylene. For all these materials, the seams must be sealed properly, or the membranes will leak.
  • Liquid polyurethanes are often used in places where it is awkward to apply a membrane. Polyurethanes are sometimes used as a coating over insulation on underground structures; however, weather conditions must be dry and relatively warm during their application.
  • Bentonite is a natural clay formed into panels or applied as a liquid spray. The panels are simply nailed to walls; the spray is mixed with a binding agent and applied to underground walls. When the bentonite comes in contact with moisture, it expands and seals out the moisture.

Humidity

Humidity levels may increase in earth-sheltered houses during the summer, which can cause condensation on the interior walls. Installing insulation on the outside of the walls will prevent the walls from cooling down to earth temperature; however, it also reduces the summer cooling effect of the walls, which may be viewed as an advantage in hot temperatures. Mechanical air conditioning or a dehumidifier is often necessary to solve the humidity issue. Proper ventilation of closets and other closed spaces should keep the humidity from becoming a problem in those areas. See our section on moisture control for more information.

Insulation

Although insulation in an underground building does not need to be as thick as that in a conventional house, it is necessary to make an earthen house comfortable. Insulation is usually placed on the exterior of the house after applying the waterproofing material, so the heat generated, collected, and absorbed within the earth-sheltered envelope is retained inside the building’s interior. If insulating outside the wall, a protective layer of board should be added to keep the insulation from contacting the earth. Depending on the type of structure—wood, masonry, concrete, or steel—insulation may instead be placed inside the walls before the waterproofing material is applied. See our section on insulation for more information.

Air Exchange/Air Quality

Adequate ventilation must be carefully planned when building an earth-sheltered dwelling. Generally, well-planned, natural ventilation or ventilation by exhaust fans can dissipate ordinary odors. Any combustion appliances that are installed should be “sealed combustion units,” which have their own, direct source of outside air for combustion, and the combustion gases are directly vented to the outside. In addition, indoor pollutants emitted by formaldehyde foam insulation, plywood, and some fabrics can accumulate and become an irritant if ventilation is not properly planned. See our section on ventilation for more information.

www.energysavers.gov

Leave a Reply Text

Your email address will not be published. Required fields are marked *

newsletter
Want to keep up to date with all our latest news and information?
Subscribe to receive FREE TIPS, all new Radio/Podcast Episodes and Videos that will help you start Dropping your Energy Bill!
Enter your email below to join a world of new knowledge and savings!


LOGO